1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all
configuration settings to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some
configurations cannot be restored. For more information, see Secure Boot on page 152.
DIMM slot locations
DIMM slots are numbered sequentially (1 through 8) for each processor.
The arrow points to the front of the server.
Processor, heatsink, and socket components
Component identification 23
To Next Page
Loading...
