To Next Page

To Previous Page

• Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps

are flexible straps with a minimum of 1 megohm ±10 percent resistance in the ground cords. To provide

proper ground, wear the strap snug against the skin.

• Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet when

standing on conductive floors or dissipating floor mats.

• Use conductive field service tools.

• Use a portable field service kit with a folding static-dissipating work mat.

If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install

the part.

For more information on static electricity or assistance with product installation, contact an authorized reseller.

8 Getting started

Questions and Answers:

Need help?

Do you have a question about the HPE ProLiant MicroServer Gen10 Series and is the answer not in the manual?

HPE ProLiant MicroServer Gen10 Series Specifications

General

Product Line	HPE ProLiant MicroServer
Processor	AMD Opteron X3000 Series
Memory Slots	2
Networking	2x 1GbE ports
Memory	Up to 32 GB DDR4 UDIMM
Storage	4 LFF SATA HDD bays (3.5-inch)
RAID Support	RAID 0, 1
Power Supply	200W non-redundant power supply
Management	HPE iLO 5 Standard
Form Factor	Micro Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Weight	Approx. 6.5 kg