HPE ProLiant MicroServer Gen10 Series User Manual

Component identification
This chapter describes the external and internal server features and components.
Front panel components
Item Component Description
1 Drive bays (4, behind the front
bezel)
By default, the drive bays support 3.5-inch LFF SATA drives.
To support 2.5-inch SFF drives, install the SFF drive converter
option.
2 Front bezel unlock indicator To remove the front bezel from the chassis, this groove must
show the blue indicator.
3 Front bezel lock indicator To lock the front bezel in the chassis, this groove must show
the blue indicator.
4 Front bezel To access the front drive bays, remove this bezel.
5 USB 3.0 ports (2) Connect USB 3.0 devices to these ports. USB 3.0 support
after POST varies by operating system.
6 Media bay When the relevant enablement options kits are installed, this
bay supports either a slim-type optical disc drive or solid state
drive option.
Component identification 9

HPE ProLiant MicroServer Gen10 Series Specifications

General

Product Line	HPE ProLiant MicroServer
Processor	AMD Opteron X3000 Series
Memory Slots	2
Networking	2x 1GbE ports
Memory	Up to 32 GB DDR4 UDIMM
Storage	4 LFF SATA HDD bays (3.5-inch)
RAID Support	RAID 0, 1
Power Supply	200W non-redundant power supply
Management	HPE iLO 5 Standard
Form Factor	Micro Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Weight	Approx. 6.5 kg