Software tools and solutions
Server mode
Software or configuration utility Server mode
Aptio Setup Utility Offline
HPE Smart Storage Administrator Online and offline
Marvell Storage Utility Online
Marvell BIOS Utility Offline
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the HPE ProLiant MicroServer Gen10 website:
http://www.hpe.com/servers/microserver
Aptio Setup Utility
The Aptio Setup Utility is embedded in the system ROM. This utility enables you to perform a wide range of
configuration activities, including the following:
• Configuring system devices and installed options
• Enabling and disabling system features
• Displaying system information
• Selecting the primary boot controller
• Configuring memory options
Using the Aptio Setup Utility
To use the Aptio Setup Utility, use the following keys:
Key Action
F2 or Del (during POST) Access the Aptio Setup Utility.
Left and right arrows Navigate the menus.
Up and down arrows Navigate menu items.
Enter Select menu items.
F4 Save selections and exit the utility.
F1 Access help for the highlighted configuration option.
Esc Exit the utility.
Default configuration settings are applied to the server in either of the following scenarios:
• When the system powers up for the first time
• When the system is restored to the default settings
54 Software tools and solutions
To Next Page
Loading...
Need help?
General
