Figure 4-38 Removing a water pump assembly
Step 8 Use a at-head screwdriver to remove the hose clamp from the water pump, and
then remove the pump, as shown in by (1) and (2) in Figure 4-39.
Figure 4-39 Removing a water pump
Step 9 Install a new water pump and reinstall the water pump assembly in the cabinet,
as shown in by (3) in Figure 4-39. Connect the water pipe and secure it using a
hose clamp. Connect the water pump power cable.
Step 10 Remove the blockage from the water pan, reinstall the water pan cover, and then
close the front door.
----End
FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario) 4 Parts Replacement
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 94
To Next Page
Loading...
