Table 5-12 Function check
Function Path Operation
View
informati
on about
cabinet
electroni
c clasp
locks
Choose
Monitoring >
Cabinet >
Global
cabinet >
Cabinet
Electronic
Clasp Lock n.
Click the
Running
Information
tab.
View the running information
about electronic lock 1 on the
WebUI.
Change
a cabinet
electroni
c clasp
lock
name
Click the
Running
Parameters tab.
Change the cabinet electronic
clasp lock name.
Remotely
open a
cabinet
electroni
c clasp
lock
Click the
Controls tab.
Select Open the door on
Controls, and click Submit to
remotely open the door.
Open
cabinet
electroni
c clasp
locks in
batches
Choose Monitoring > Cabinet
and click the Controls tab.
Select Open front door, or Open
back door from the Open the
door drop-down list box, select
the setting, and click Submit.
The cabinet electronic clasp locks
unlock the doors in batches
based on the signal value.
a: Cabinet electronic clasp lock 1 is used as an example.
Step 6 When closing the door, rotate the lock handle vertically downwards. If the door
cannot be opened or closed properly, locate the fault.
1. Check whether there is friction between the lock tongue and the electronic
clasp lock. If there is friction, adjust the installation position of the electronic
clasp lock.
FusionModule500 Smart Mini Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2020-11-30) Copyright © Huawei Technologies Co., Ltd. 132
To Next Page
Loading...