Huawei FusionModule800

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Issue 10 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
251
Figure 6-6 Setting the Outbox Setting parameter

Click Test to test whether the email is sent successfully. If the email fails to be sent, check the
sender's email parameter settings; if the email is sent successfully, click Submit.

If Test email sending failed is displayed, check whether the receiver's email server requires CA
certificate verification. If it is required, download the CA certificate from the receiver's email
website and upload it in the Mailbox Certificate area.

The following email addresses are for reference only (the actual parameters apply) and are used only
for configuring the email function.
Table 6-15 Main parameters on the sender's email configuration page
Email
Type
Email
Server
Domain
Name
Mailbox Server
IP Address
Encryption
Mode and
SMTP port
Remarks
Sina Mail
smtp.sina.co
m
How to obtain:
1. Click Start on
the PC, enter
cmd in
Running area,
and click
Search to
access the
administrator
page.
2. Enter ping
email server
domain name
at the position
Non-encryption:
25

The email
server must
comply with
the standard
SMTP
protocol to
ensure that the
email sending
and receiving
functions are
normal.

Enter the
email client
authorization
163 Mail
smtp.163.com
Non-encryption:
25; SSL
encryption: 465
126 Mail
smtp.126.com
Non-encryption:
25; SSL
encryption: 465
QQ Mail
smtp.QQ.com
SSL encryption:
465
Sohu Mail
smtp.sohu.co
m
Non-encryption:
25