Huawei FusionModule800 Installation Guide

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Issue 10 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
252
Email
Type
Email
Server
Domain
Name
Mailbox Server
IP Address
Encryption
Mode and
SMTP port
Remarks
139 Mail
smtp.139.com
of the blinking
cursor and
press Enter to
obtain email
server IP
addresses.
Non-encryption:
25
password at
Password for
163 Mail, 126
Mail, and QQ
Mail.
Hotmail
smtp-mail.out
look.com
TLS encryption:
587
189 Mail
smtp.189.com
Non-encryption:
25
Step 3 Click Add in the Email Receiving Settings area and enter the receiver's email address.
Step 4 Click Confirm to access the re-authentication page. Enter Login password and click Submit.
Step 5 Click Test to check whether the added email address is available. If it is available,
Successfully to send the test email. is displayed. If it is unavailable, Failed to send the test
email. is displayed. Check whether the receiver's email parameters are correctly set.
Step 6 Select Add on the SMS Settings page and enter the receiver's mobile phone number.
Step 7 Click Confirm to access the re-authentication page. Enter Login password and click Submit.
Step 8 Click Test to check whether the added mobile phone number is available. If it is available,
Successfully to send the test short message. is displayed. If it is unavailable, Failed to send
the test short message. is displayed. Check whether the receiver's mobile phone parameters
for receiving short messages are correctly set.
Figure 6-7 SMS setting page
Step 9 Set the Alarm notification delay time and Add Alarm Notification parameters.

Huawei FusionModule800 Specifications

General

Model	FusionModule800
Form Factor	Modular
Power Supply	Dual Hot-swappable Power Supplies
Cooling System	In-row cooling or room-level cooling
Power Density	High Power Density
Deployment Time	Less than 1 week
Energy Efficiency	High Energy Efficiency
Humidity Range	5% to 90% (non-condensing)
Altitude	Up to 3000 meters