EasyManuals Logo

Huawei SmartAX MA5600T User Manual

Huawei SmartAX MA5600T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #254 background imageLoading...
Page #254 background image
– Radius implements the user accounting by managing a simple user authentication
database.
– The authentication and accounting requests of users can be passed on to the Radius
server through a network access server (NAS).
l Principle of RADIUS:
– When a user tries to access another network (or some network resources) by setting up
a connection to the NAS through a network, the NAS forwards the user authentication
and accounting information to the RADIUS server. The RADIUS protocol specifies the
means of transmitting the user information and accounting information between the
NAS and the RADIUS server.
– The RADIUS server receives the connection requests of users sent from the NAS,
authenticates the user account and password contained in the user authentication data,
and returns the required data to the NAS.
l Specification:
– For the MA5600T/MA5603T/MA5608T, the RADIUS is configured based on each
RADIUS server group.
– In actual networking, a RADIUS server group can be any of the following:
– An independent RADIUS server
– A pair of primary/secondary RADIUS servers with the same configuration but
different IP addresses
– The following lists the attributes of a RADIUS server template:
– IP addresses of primary and secondary servers
– Shared key
– RADIUS server type
l The configuration of the RADIUS protocol defines only the essential parameters for the
information exchange between the MA5600T/MA5603T/MA5608T and the RADIUS
server. To make the essential parameters take effect, the RADIUS server group should be
referenced in a certain domain.
l The RADIUS attribute list defines the attribute parameters for interaction between the
MA5600T/MA5603T/MA5608T and the RADIUS server. Table 2-3 describes the
parameters.
Table 2-3 RADIUS attribute list
Parameter Code Parameter Name Description
1 User-Name Indicates the user name for
authentication.
2 Password Indicates the user password for
authentication. This parameter is
valid only for PAP
authentication.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 2 Basic Configurations
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
229

Table of Contents

Other manuals for Huawei SmartAX MA5600T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5600T and is the answer not in the manual?

Huawei SmartAX MA5600T Specifications

General IconGeneral
BrandHuawei
ModelSmartAX MA5600T
CategoryControl Unit
LanguageEnglish

Related product manuals