A Additional Information
The additional information includes the FAQ, operation guide on supplementary charge of the
battery, commissioning record, software factory defaults, and acronyms and abbreviations.
A.1 Configuring the IP Address of the Maintenance Terminal
This topic describes how to configure the IP address of the maintenance terminal so that the
maintenance terminal can access the UA5000 normally in telnet mode or SSH mode.
A.2 Making a Script
This topic describes how to make a script according to the collected data plan.
A.3 Operation Guide on Battery Supplementary Charge
Based on the battery features, automatic discharge may occur due to chemical reactions during
the delivery and storage. In this case, the battery capacity and the open circuit voltage decrease.
To restore the voltage and capacity of the battery completely, perform the supplementary charge
before using the battery.
A.4 Software Package Settings
This topic describes the software package settings of the UA5000.
A.5 Acronyms and Abbreviations
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI A Additional Information
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
114
To Next Page
Loading...
