Procedure
Step 1 In common user mode, run the display language command to check whether the version of the
host software meets the deployment requirement.
Step 2 In common user mode, run the display version command to check whether the version of the
board software meets the deployment requirement.
----End
Result
l The version of the host software and the version of the board software meet the deployment
requirement.
l If there is an inconsistency, contact the Huawei customer service center, or upgrade the
host software, if necessary. For details about the upgrade procedure, refer to the UA5000
Upgrade Guide.
3.7 Adding a Shelf
This topic describes how to add a shelf (including the master shelf and the slave shelf) to ensure
the normal running of the shelf.
Prerequisites
The subtending cables between shelves must be properly connected.
Precaution
When adding a master shelf through Telnet, ensure that the network cable is connected to the
network port on the active control board correctly.
NOTE
When adding a master shelf, the UA5000 adds the active/standby boards automatically. To prevent data
inconsistency, the standby control board will be reset when adding a master shelf, which is in the normal
state. When adding a master shelf, if the network cable is inserted on the standby control board, the standby
control board rebooting will interrupt the Telnet connection. Therefore, to add a master shelf through Telnet,
ensure that the network cable is connected to the network port on the active control board correctly.
Procedure
Step 1 In the global config mode, run the frame add 0 command to add a master shelf.
Step 2 In the global config mode, run the frame add 1 command to add a slave shelf.
Step 3 In the global config mode, run the frame connect 0 1 command to create the links between
shelves.
----End
Result
Run the display frame info command to query the shelf information and check whether the
master shelf and the slave shelf are normal.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59
To Next Page
Loading...
