Huawei UA5000 - Login in SSH Mode (Outband Management)

The user authentication mode is set to RSA. Therefore, the system displays a message, as
shown in Figure 3-28. After entering the corresponding user name (huawei), you can log
in to the system.
NOTE
To improve the system security, please modify your password after first login. You can run the terminal
user password command to modify your password.
Figure 3-28 Interface of logging in to the system through the SSH client software
----End
Result
After logging to the system, you can maintain and manage the UA5000. For the basic information
on how to use the CLI, see CLI Operation Characteristics.
3.5.5 Login in SSH Mode (Outband Management)
This topic describes how to log in to the UA5000 in secure shell (SSH) mode through the
maintenance network port (outband management port) and then maintain and manage the
UA5000. In SSH mode, the authentication, encryption, and authorization are provided to ensure
the security of network communications. When you remotely log in to the UA5000 through the
network whose security cannot be ensured, the secure information and the powerful
authentication function can be provided in SSH mode so that the UA5000 is protected from IP
address-spoofing or plain text password interception attack.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48