The user authentication mode is set to RSA. Therefore, the system displays a message, as
shown in Figure 3-38. After entering the corresponding user name (huawei), you can log
in to the system.
NOTE
To improve the system security, please modify your password after first login. You can run the terminal
user password command to modify your password.
Figure 3-38 Interface of logging in to the system through the SSH client software
----End
Result
After logging to the system, you can maintain and manage the UA5000. For the basic information
on how to use the CLI, see CLI Operation Characteristics.
3.6 Checking the Software Version
This topic describes how to check whether the version of the running software meets the
requirements for office deployment.
Prerequisites
You must log in successfully to the UA5000. For the detailed procedure, refer to "3.5 Logging
in to the System."
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
58
To Next Page
Loading...
