Contents
About This Document.....................................................................................................................ii
1 Commissioning Description.......................................................................................................1
1.1 Definition............................................................................................................................................................2
1.2 Commissioning Flow..........................................................................................................................................2
2 Commissioning Preparations......................................................................................................4
2.1 Hardware Check.................................................................................................................................................5
2.2 Software Requirements.......................................................................................................................................5
2.3 Tool Requirements.............................................................................................................................................6
2.4 Data Requirements.............................................................................................................................................7
3 Stand-Alone Commissioning......................................................................................................9
3.1 Checking the Settings of Jumpers and DIP Switches.......................................................................................11
3.1.1 Checking the Settings of DIP Switches and Jumpers of Environment Monitoring Boards....................11
3.1.2 Checking the DIP Settings on the Monitoring Board of the Fan.............................................................17
3.2 Powering On the Indoor Device.......................................................................................................................21
3.3 Powering On the Outdoor Device....................................................................................................................22
3.4 Commissioning the Power System...................................................................................................................23
3.4.1 Checking the Power Supply of DC PDU.................................................................................................23
3.4.2 Checking the Power Supply of AC Power Module.................................................................................23
3.4.3 Configuring the Battery and Checking the Power Supply of the Battery................................................24
3.4.4 Checking the Power Supply of the Power Board ...................................................................................25
3.4.5 Checking the Power Supply of the Heat Exchanger................................................................................26
3.5 Logging in to the System..................................................................................................................................27
3.5.1 Login in the Local Serial Port Mode.......................................................................................................27
3.5.2 Login in Telnet Mode (Inband Management).........................................................................................32
3.5.3 Login in Telnet Mode (Outband Management).......................................................................................35
3.5.4 Login in SSH Mode (Inband Management)............................................................................................38
3.5.5 Login in SSH Mode (Outband Management)..........................................................................................48
3.6 Checking the Software Version........................................................................................................................58
3.7 Adding a Shelf..................................................................................................................................................59
3.8 Configuring the Board......................................................................................................................................60
3.9 Loading the Script............................................................................................................................................60
3.10 Configuring the Networking Mode of the System.........................................................................................61
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI Contents
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v
To Next Page
Loading...
