Huawei UA5000 - Data Requirements

No. Item Description Remarks
Straight through cable Used for commissioning the
services.
Tail fiber Used for detecting the optical
power and optical sensitivity, and
transmitting the service upstream.
2 Maintain
ing
terminal
(Generally) Portable computer with
HyperTerminal application
Used for logging in to the
UA5000 to commission the
UA5000.
3 Auxiliar
y device
and
meter
Optical power meter Used for the following tests on the
optical port: actual receive optical
power test, receive sensitivity test,
and overload optical power test.
Adjustable optical attenuator Used on the optical signal receive
port for attenuating the received
optical signal during the device
commissioning to protect the
optical port from being damaged by
strong optical power.
Multimeter Used for measuring the voltage,
resistance, and current intensity
during the power commissioning.
2.4 Data Requirements
This topic describes the data requirements for the commissioning. The information about
hardware configuration, networking, and data plan must be available for data configuration.
Checklist
Before the commissioning, collect the information about the hardware configuration,
networking, and data plan based on the engineering documents such as the project division layout
and network design. Table 2-4 provides the data requirement checklist.
Table 2-4 Checklist
No.
Item Description
1 Hardware
configuration
It includes but is not limited to:
l The type of the control board and other boards, and the
slot layout.
l The type of the uplink port and service port, and their
physical locations.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 2 Commissioning Preparations
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7