Step 4 Run the telnet application.
Choose Start > Run from the main menu on the maintenance terminal. On the Open address
bar of the Run interface, enter telnet X.X.X.X (X.X.X.X indicates the IP address of the ETH0
port on the UA5000), as shown in Figure 3-18 (Windows is considered as an example), and
then click OK to display the remote login dialog box.
Figure 3-18 Interface of running the telnet application
Step 5 Log in to the system.
In the remote login dialog box, enter the user name and the password. By default, the user name
is root and the password is admin. After you log in to the system successfully, a message is
displayed indicating that the login is successful, as show in the following message.
>>User name:root
>>User password:
Huawei HONET UA5000 Universal Access Unit.
Copyright(C) 1998-2009 by Huawei Technologies Co.,Ltd.
NOTE
To improve the system security, please modify your password after first login. You can run the terminal user
password command to modify your password.
----End
Result
After logging to the system, you can maintain and manage the UA5000. For the basic information
on how to use the CLI, see CLI Operation Characteristics.
3.5.4 Login in SSH Mode (Inband Management)
This topic describes how to log in to the UA5000 in secure shell (SSH) mode through the uplink
port (inband management port) and then maintain and manage the UA5000. In SSH mode, the
authentication, encryption, and authorization are provided to ensure the security of network
communications. When you remotely log in to the UA5000 through the network whose security
cannot be ensured, the secure information and the powerful authentication function can be
provided in SSH mode so that the UA5000 is protected from IP address-spoofing or plain text
password interception attack.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38
To Next Page
Loading...
