EasyManua.ls Logo

Huawei UA5000 - Checking the Alarm Function and the Event Function; Verifying the Alarm Function and the Event Function

Huawei UA5000
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.1 Checking the Alarm Function and the Event Function
This topic describes how to check whether the alarm function and the event function of the
UA5000 are in the normal state after all the alarms and events are output to the command lines.
5.1.1 Verifying the Alarm Function and the Event Function
This topic describes how to check whether the alarm function and the event function of the device
are in the normal state by triggering various alarms or events through related operations.
Precaution
Refer to the Installation Guide for how to remove and insert boards and cables so as to avoid
mal-operation.
Verifying
Table 5-1 shows the verification of the alarm function and the event function.
Table 5-1 Verification of the alarm function and the event function
Operation
Description
Remove/insert a service board. Check whether the alarm/event attributes including
the alarm/event severity and the alarm/event
occurrence time are correct and check whether the
alarm/event on the NMS is consistent with the
alarm/event on the maintenance terminal.
Reset the board. Check whether the alarm/event attributes including
the alarm/event severity and the alarm/event
occurrence time are correct and check whether the
alarm/event on the NMS is consistent with the
alarm/event on the maintenance terminal.
Remove/insert the optical fiber on an
optical port.
Check whether the alarm/event attributes including
the alarm/event severity and the alarm/event
occurrence time are correct and check whether the
alarm/event on the NMS is consistent with the
alarm/event on the maintenance terminal.
Open/close the cabinet door. Check whether the alarm/event attributes including
the alarm/event severity and the alarm/event
occurrence time are correct and check whether the
alarm/event on the NMS is consistent with the
alarm/event on the maintenance terminal.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 5 Maintenance and Management Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109

Table of Contents

Other manuals for Huawei UA5000

Related product manuals