Huawei UA5000 - 6.2 PMIB01 Sensor Transfer Box

Figure 3-36 Interface of the SSH client software
2. Log in to the system.
Choose Session from the navigation tree, and then enter the IP address of the UA5000 in
the Host Name (or IP address) text box, as shown in Figure 3-37. Then, click Open to
log in to the system.
Figure 3-37 Interface of logging in to the system through the SSH client software
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57