Figure 3-34 Interface of saving the public key and the private key
3. Generate the RSA public key.
Start sshkey.exe, the password convertor on the client, click Browse, select the public key
file that is saved, and then click Convert to convert the client public key to the RSA public
key.Figure 3-35 shows the interface of converting the client public key to the RSA public
key.
UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI 3 Stand-Alone Commissioning
Issue 04 (2012-06-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55
To Next Page
Loading...
