14
Using This Guide
Chapter 1 Installation and Preparation
Chapter
1
Installation and
Preparation
Using This Guide
The chapters cover the following contents; please read the
chapters that may be required for your type of
videoconference.
Chapter 1: Installation and Preparation
This chapter guides you through the system configuration
and information required to use your Videoconferencing
Terminal for the first time. It shows you how to install and
connect your Videoconferencing Terminal, to turn the
system on/off and how to access basic on-screen menus.
Chapter 2:
Registration and Setup
This chapter describes how to register and set up all the
necessary items for system administrators, using the on-
screen menus.
Chapter 3: Basic Videoconference
This chapter guides you through the basic operations and
settings to conduct a videoconference. You will learn how
to conduct a conference from start to finish. It is
recommended that this chapter be read by participants in
the videoconference.
Chapter 4: Videoconference With Optional
Equipment
This chapter shows advanced videoconferencing using the
optional equipment.
Chapter 5: Data Conference Using Dual Stream
Box
This chapter shows you how to integrate data from a
computer or other external equipment into a
videoconference by using the optional Dual Stream Box.
Chapter 6:
Use as Computer Display
This chapter shows you how to use the Videoconferencing
Terminal as a computer display.
Chapter 7: Web Control Function
This chapter shows you how to control and set up the
ViewPoint 8050 through the Web.
Appendix
This chapter contains message and troubleshooting lists,
specifications, and glossaries.
To Next Page
Loading...
