74
Accessing the Videoconferencing Terminal
Chapter 4 Videoconference With Optional Equipment
Accessing the
Videoconferencing
Terminal
The following controls are available to access the
Videoconferencing Terminal. For details on each control,
consult your HUAWEI dealer.
Using the Web Monitor Function
Images from the unit can be monitored from a Web
browser.
To enable monitoring of the unit’s images, set “Web
Monitor” to “On” in the Administrator Setup menu (page
35).
For details on access and passwords, see “Administrator
Setup Menu” on page 35.
Using a Web Browser
Accessing the IP address of the Videoconferencing
Terminal from a Web browser allows you to control or set
up the System.
To permit accessing the Terminal, set “Web Access” to
“On” in the Administrator Setup menu (page 35).
For details on the password to access or Web control
feature, see “Administrator Setup Menu” on page 35.
Using Telnet
Accessing the IP address of the Videoconferencing
Terminal from Telnet allows you to control or set up the
System.
To permit accessing the Terminal, set “Web Access” to
“On” in the Administrator Setup menu (page 35).
For details on the password to access or Web control
feature, see “Administrator Setup Menu” on page 35.
To Next Page
Loading...
