22
Safety limit switch
Each inspection hatch is secured with a safety limit switch. This prevents an improper start of
the ram when the inspection hatch is not properly closed.
Trojan 5
Technical specification:
standards: ISO 13849- 1, IEC/EN 60204- 1, ISO 14119, IEC/EN 60947- 5- 1
safety contacts: 2 break contacts
auxiliary contacts: 1 make contact
protection: IP 67
temperature range: −20°C until + 80°C
mechanical service life: 1 × 10
6
switching cycles
To Next Page
Loading...