92
Lubrication instructions for portable compactor
Time schedule
Pos.
designation part / condition
activity interval* remarks
01 door hinges - bearing KS # = ca. 500 grease nipple
02 door hinges
(rear)
- bearing S # = ca. 500 grease nipple
03 container ratchet - spindle KS # = ca. 500 apply with a brush
04 ram guiding - polyamide block KS # = ca. 500 apply with a brush
05 hydraulic power unit - oil level K *
(portable compactor) - tightness K *
- oil change
approx. 45 l 5,5 kW
approx. 100 l 7,5 kW
W # = ca. 2000
06 compaction cylinder - bearing KS # = ca. 500 grease
nipple
07 container rollers
(front), if existing
- bearing S # = ca. 500 grease nipple
08 compaction chamber - behind the ram R & cleanout
09 retaining plate - sheet guide S # = ca. 500 grease nipple
(if existing)
10 inspection hatch - door hinges KS # = ca. 500 grease nipple
* As needed, at the latest after interval. The intervals refer to 8
hours per day.
*
= daily
W = change
= weekly
S = lubrication
$
= monthly
K = checking
§
= annually
R = cleaning
#
= about every ..... operating hours
To Next Page
Loading...