30 – English
5.2.7 Replacing the engine air lter
1. Tilt the collector to access the lter cover.
2. Loosen the knobs that hold the lter cover and lift
o the cover.
3. Lift out the air lter.
4. Put in a lter.
5. Attach the lter cover and tighten the knobs.
Propulsion
5.2.8 To replace the spark plug
Tilt the collector for access to the engine.
To replace the spark plug a special wrench developed
by Husqvarna needs to be used. Part number
589 88 32-01.
NOTE: See “6.1 Technical data” on page 70
for information regarding the type of spark plug.
To Next Page
Loading...
Need help?
General
