If you selected “Interval,” you will see the following display:
Turn the Lower Line knob to choose one of the following:
• 01 Day-31 Day.
Note: WeatherTRAK ET plus treats the current day as “Day 0” and
will water on that day. “Day 01” will start at 12:01 a.m. on the day
following the current day.
A “01” day interval will water every day, a “02” day interval will
water every second day, and a “03” day interval will water every 3
days.
If you selected “Days of Week,” you will see the following display:
1. Turn the Lower Line knob to choose one of the following:
• Y for Yes-OK to water on this Day (Default Setting)
• - for Non-Water Day - Never water on this day.
Note: The lower line of the display shows the default settings for
January. For each month of the year, the user selects which days
of the week to water. Note that there is a cursor beneath the “Y,”
(Yes) that is under the “S” for Sunday to indicate it can be
changed.
Some watering may occur on non-water days if watering cycles
that start during “Y” days extend into “–” days AND there is no
water window to stop this.
To Next Page
Loading...