4. Turn the Lower Line knob to choose the desired response.
• 0 to 9 (Default setting “0” to create “70”).
Note: The value “(default)” will appear if the sprinkler is using
the sprinkler type’s default value.
Set Soil Type
1. Turn the Upper Line knob until you see:
2. Turn the Lower Line knob to choose one of the following
soil types:
• Sandy (Default Setting),
• Sandy Loam,
• Loam,
• Clay Loam or
• Clay.
Set Plant Type
1. Turn the Upper Line knob to the next position.
2. Turn the Lower Line knob to choose one of the following plant
types:
• Cool Season Grass (Default Setting),
• Warm Season Grass,
• Combined Grass,
• Flowers,
• Trees,
• Shrubs - High Water Use,
• Shrubs - Medium Water Use,
• Shrubs - Low Water Use,
• Mixed - High Water Use,
• Mixed - Medium Water Use,
• Mixed - Low Water Use,
To Next Page
Loading...