3. Turn the Upper Line knob to the next position.
Note that the cursor has moved to the “7,” which can now
be changed.
4. Turn the Lower Line knob to change the number.
Repeat these steps until you have set your desired precipitation
rate.
Set Efficiency
1. Turn the Upper Line knob until you see:
Note that there is a cursor under the “7” to indicate this digit can
be changed.
2. Turn the Lower Line knob to choose one of the following system
efficiency settings:
• 1 to 9 (default depends on sprinkler type selected
previously).
3. Turn the Upper Line knob to the next position.
Note that the cursor has moved to the “0,” which can now
be changed.
To Next Page
Loading...