By inserting a minimum soak time between the irrigation cycles, the
irrigation water is allowed to soak into the soil before the next cycle
begins.
Note: Some soak times may be longer than the minimum soak time
that you set because other stations may be completing their cycle
runtimes before the station can return to watering.
Set Water Days
1. Turn the Upper Line knob until you see:
2. Turn the Lower Line knob to the desired watering day type:
• Let Me Set Water Days (Default Setting),
• Water 7 Days Per Week or
• Set Water Day Intervals.
“Let Me Set Water Days” allows you to set which days of the
week the controller will irrigate. You can choose different days
for each month of the year.
• “Water 7 Days Per Week” irrigates every day, or
• “Set Water Day Intervals” allows you to set a regular
interval for irrigation. For example, if you set a water day
interval of “2,” the controller will irrigate every other day. If
you set a water day interval of “7,” the controller will water
every seven days or once a week, etc.
The choices for “Set Water Days” are shown below.
For “Let Me Set Water Days”:
1. Turn the Upper Line knob until you see:
The lower line of the display shows the default settings
for January.
To Next Page
Loading...