3. Copy Program Default
This erases all station programming and restores factory-set
defaults to individual stations or all stations.
4. Copy Schedule Defaults
This erases all schedules and restores factory-set defaults to all
schedules.
5. Copy Setup Defaults
This erases all user selections and restores the factory-set defaults
for the SETUP feature.
Copy From the Station Number
1. Turn the Function Selector knob to COPY.
The display will look like this:
2. Turn the Upper Line knob to select the desired source station:
• Station 1, 2, 3, ... to the last available station on the controller.
To Station Number (Press Copy)
1. Turn the Lower Line knob to the desired destination. These
include:
• Station 1, 2, 3, ... to the last available station on the controller
and
• All Stations.
2. Press the Copy button.
For this example, we will copy the program information from
Station 3 to Station 4. (Turn the Upper Line knob to “COPY
FROM STA 03.”)
To Next Page
Loading...