Copy Program Defaults
You can copy program defaults to individual stations or to all
stations.
1. Turn the Function Selector knob to COPY.
2. Turn the Upper Line knob past all of the “COPY FROM STA 01,
02, 03...” displays through to the last station on your controller.
The next display is:
3. Turn the Lower Line knob to the desired setting. These include:
• Station 1, 2, 3, ... to last available station on controller and
• All Stations (Default Setting).
4. Press the “COPY” button. The display will change briefly to this:
Then the display will change back to this:
To Next Page
Loading...