IAI RCON Series - Page 12

Quick Start Guide ~ RCON PROFINET IO Specification ~
p12
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Wiring
Table
of
Contents
Complement 1
Installing Option Fan Unit
Installation complete
RCON front side
Fan Unit
Hook the claw
of the fan unit
to the driver
unit
(1)
RCON front side
(3)
Pull down the
fan unit to the
front side
(2)
Press the fan
unit from the
top and snap in
Adjust the installation orientation of
the RCON system and fan unit.
Hook the claw of the fan unit to the driver
unit as shown in the figure on the right.
(1)
Pull down the fan unit to the front of
the RCON system.
(2)
Press the fan unit from the top and snap in.
(3)
Adjust the installation orientation of
the RCON-SC and fan unit.
Hook the claw of the fan unit to
the RCON-SC as shown in the figure
on the right.
(1)
Pull down the fan unit to the front side.
(2)
Press the fan unit from the top and snap in.
(3)
Fan Unit for
200V driver unit
Hook the claw
of the fan unit
to the driver
unit
Pull down the
fan unit to the
front side
Press the fan unit
from the top and
snap in
(1)
Here, explains the process to install a
fan unit in option.
Complement 2
Installing Fan Unit to 200V Driver Unit
The fan unit for 200V driver is to be
delivered installed on RCON-SC.
Utilize this supplement for such as
maintenance.
(3)
(2)