Memory Recall
Restores the factory default settings and performs an autoadjust
Auto Color
Autoadjusts the color gains to optimal.
DOS Mode
Allows optimization for either Text (default) or Graphic display
modes.
OSD
Setting (OSD icon)
OSD H-Position
Allows adjustment of the horizontal location of the OSD menu
OSD V-Position
Allows adjustment of the vertical location of the OSD menu
Timeout
Time (5 to 120 seconds) until the OSD image is automatically
removed (without saving any manual settings). The default is 10.
Language
Allows changing of the OSD language from English (default) to
Français, Deutsch, or Español.
Transparency
Allows changing the OSD image from opaque (default) to
transparent (range of 0-6).
Color
Setting (Palette icon)
Color Setting
Allows changing of the color temperature of the white point from
6500K (default) to 9300K to User setting.
Red Allows changing of the Red gain setting
Green Allows changing of the Green gain setting
Blue Allows changing of the Blue gain setting
Information
(! icon)
Provides the current horizontal and vertical refresh frequencies, the
FirmWare (FW) revision level and the FW date.
Exit Saves the current settings and exits the OSD
Note:
The only functions usually needed are Autoadjust, Brightness, and
Information. It is not necessary to modify the other settings in the course of
normal operation.
Adjusting the image
Update November 2005
Chapter 2. Installing the IBM 4820 57
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
||
||
|
|
|
||
|
|
|
To Next Page
Loading...
