IBM 6400 Maintenance Information Manual

108
Chapter 5 Troubleshooting Display Messages
WAITING FOR
ETHERNET ADAPTER
Status message that
appears when printer
is first powered on if
the internal Network
Interface Card is
installed. An Ethernet
adapter must be
detected early in the
power up sequence
so the printer can tell
the adapter it has
been detected and
continue with its own
power up sequence.
Compared to the
printer, the Ethernet
adapter takes a long
time to complete its
internal diagnostic
tests, so the boot
code allows the
adapter to power up
in parallel with the
printer to reduce its
effect on overall boot
time
No action required.
WAITING FOR
PROGRAM
DOWNLOAD
Emulation download
mode has been
activated, but
program download
has not yet begun.
No action required.
Table 4. Message List
Operator Panel
Message
Explanation Corrective Action

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English