Table 3. Firmware Error Codes. (continued)
Error Code Description Action / Possible Failing FRU
40B00000 The operating system surveillance
interval exceeded (operating system
surveillance time-out).
1. This error code indicates that the
operating system terminated early
(which usually implies an operating
system crash). This error code
may appear in the service
processor error log by itself.
However, in the AIX error log,
there should be another error
which points to the cause of the
operating system crash. Use the
other error as the starting point for
your service action.
2. Call service support.
40D00003 An unknown slow shutdown commanded. Insure the ambient temperature is in
the proper range.
40D00004 An unknown fast shutdown occurred. Insure the ambient temperature is in
the proper range.
40D00101 BIST on the system board failed. Replace the system board. (See note
3 on page 115.)
40D00102 BIST on the system board failed. Replace system board.
Location: P1
(See note 3 on page 115.)
158 Service Guide
To Next Page
Loading...
