Configure Nth Boot Device
In the description below, Nth can be 1st, 2nd, 3rd, and so on, depending on your
choice on the previous menu.
Options display a screen similar to the following:
Configure Nth Boot Device
Device Current Device
Number Position Name
1 1 Diskette
2 2 Port E2 - 100/10 Ethernet Adapter (Integrated)
3 Port E1 - 100/10 Ethernet Adapter Integrated)
4 3 IDE CD-ROM
5 4 SCSI 36.4 MB Hard Disk id=@0,0 (Integrated)
6-
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Type the device number of the device name that you want to select as the Nth boot
device. For example, if you entered this menu by selecting 4 on the previous menu
(configure 2nd Boot Device), then enter the number 3 based on the list shown above.
You are thus selecting the SCSI CD-ROM device to be the 2nd (Nth) device in the boot
sequence.
250 Service Guide
To Next Page
Loading...
