EasyManua.ls Logo

IBM 6C1 - Change Password Options; Set Privileged-Access Password; Unattended Start Mode

IBM 6C1
377 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Change Password Options
The Change Password Options screen enables you to select from password utilities.
Password Utilities
1 Set Privileged-Access Password
2 Remove Privileged-Access Password
3 Unattended Start Mode <OFF>
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Set Privileged-Access Password
The privileged-access password protects against the unauthorized starting of the
system programs.
Attention: If the privileged-access password has been enabled, you are asked for the
privileged-access password at startup every time you boot your system.
If you previously had set a privileged-access password and want to remove it, select
Remove Privileged-Access Password.
Unattended Start Mode
Use this option to instruct the service processor to immediately power-on the server
after a power failure, bypassing power-on password verification. Unattended start mode
can also be enabled or disabled using service processor menus. Unattended start mode
can be used on servers that require automatic power-on after a power failure.
Note: Unlike other systems, unattended start mode is not automatically disabled when
the power-on access password is removed.
Chapter 8. Using System Management Services 241

Table of Contents

Related product manuals