IBM 6C1 - Call-In;Call-Out Setup Menu

Call-In/Call-Out Setup Menu
This menu is used to configure a modem for the service processor to use to support the
system.
CALL-IN/CALL-OUT SETUP MENU
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
8. Ring Indicate Power-On Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v Modem Configuration Menu, see “Modem Configuration Menu” on page 201.
v Serial Port Selection Menu, see “Serial Port Selection Menu” on page 201.
v Serial Port Speed Setup Menu, see “Serial Port Selection Menu” on page 201.
v Telephone Number Setup Menu, see “Telephone Number Setup Menu” on
page 202.
v Call-Out Policy Setup Menu, see “Call-Out Policy Setup Menu” on page 204.
v Customer Account Setup Menu, see “Customer Account Setup Menu” on
page 205.
v Call-out Test, see “Call-Out Policy Setup Menu” on page 204.
v Ring Indicate Power-On Menu, see page 192.
200 Service Guide