Table 3. Firmware Error Codes. (continued)
Error Code Description Action / Possible Failing FRU
4B2xxxC4 System bus time-out error (checkstop) 1. If this error occurs while the
system is running, replace the
FRU indicated by the physical
location code displayed on the
operator panel.
2. If this error occurs while booting,
go to ″MAP 1540 Minimum
Configuration″, “Step 1540-24” on
page 81. Otherwise, go to the next
step.
3. Check the service processor error
log for any possible additional
FRUs.
4B2xxxC5 System bus time-out error, waiting for I/O
(checkstop)
1. Replace the FRU as indicated by
the physical location code
displayed on the operator panel.
2. Check the service processor error
log for any possible additional
FRUs.
4B2xxxC6 System bus parity error (checkstop) 1. Replace the FRU as indicated by
the physical location code
displayed on the operator panel.
2. Check the service processor error
log for any possible additional
FRUs.
4B2xxxC7 System bus protocol/transfer error
(checkstop)
1. Replace the FRU as indicated by
the physical location code
displayed on the operator panel.
2. Check the service processor error
log for additional FRU with
probability
Chapter 5. Error Code to FRU Index
171
To Next Page
Loading...
