RIPL (Remote Initial Program Load): Enables you to
select a remote system from which to load programs
through a network adapter when your system unit is first
turned on. This option also allows you to configure
network adapters, which is required for RIPL. Go to
“RIPL” on page 232.
SCSI ID: Allows you to view and change the addresses
(IDs) of the SCSI controllers attached to your system unit.
Go to “SCSI ID” on page 237.
Console: Allows the user to select which console to use
to display the SMS menus. This selection is only for the
SMS menus. It does not affect the display used by the
AIX operating system.
Follow the instructions that display on the screen.
Pressing the number 1 key after the keyboard icon
appears and before the tone returns you to SMS.
Chapter 8. Using System Management Services
225
To Next Page
Loading...
