ICD NeoGCP i7 PLUS+ - Alarm Screen; Menu Select Screen

REV. N
NeoGCP i7 PLUS+
- 12 -
Alarm Screen 3.3.
Alarm check 3.3.1.
- In case of Alarm condition, screen will automatically switch to Alarm screen.
- Number on the right of [ALARM MESSAGE] indicates number of times ALARM has occurred.
- When multiple Alarm occurs, press [ALARM] button to check contents of ALARM in a sequence.
ALARM Release 3.3.2.
- After ALARM condition is resolved, press [RESET] button to release ALARM.
- If [ALARM] is pressed without solving ALARM condition, Main screen will be displayed.
Menu Select Screen 3.4.
- Press [MENU] button on main screen and it will switch to Menu select screen.
- Press [▲], [▼] buttons on main screen to select desired item then press [ENTER] button to move to
Menu select screen.
Menu Select Screen 3.5.
- Bottom line of Menu Select Screen shows English abbreviation of the menus that can be selected on the
screen.
- When a menu is selected, an exclamation mark will be shown next to the English abbreviation.
- Press [◀], [▶] buttons on Menu Screen to select desired item and press [ENTER] button.
- Then press [▲], [▼] buttons to modify main information of Gen-set.