3-31
Default Options Configuration
Rev AA
Imaging
Printer Codes
Machine ID None None 1 Allows the setting of a unique special code for the
production Machine ID. It is a global setting for the
printer and all layouts that reference a Machine ID
code print this value
Shift Codes
Number of
Shifts
None None 0 The number of shifts per day
Imaging
Shift Codes
Start of Day None None +00:00:00 Sets the start of the day when all automatically
calculated date codes change e.g. the factory 'day'
can be set to start at 2.00am or 6.00am
Update Queue
Max Queue
Length
None None 1 Sets the limit on the number of jobs that can be in
the selection queue when Allocation printing is
enabled
Operations
Cycle Head
Position
None None None Cycle moving the printhead from its parked position
to its printing position
Cycle Print None None None Cycle the unit printing continuously
Generate Log
Files
None None None Triggering this Operation will cause log files to be
generated in the Log File Folder within the coder.
These files would be requested by Technical
Support in the event of the coder have persistent
issues.
Perform Motor
Calibration
None None None Calibrate the stepper motors
Print Test
Image
None None None Print a test image
System ComPort1
Baud Rate Baud Rate Bits/
sec
115200 Sets the baud rate of serial comm port
Flow Control None None None Sets hardware or software handshaking
Section Sub-Section Parameter
Name
CLARiTY
Name
Units Default Functionality
Table 3-1: Videojet 6210 Printer Configuration Manager (Continued)
ICE Pegasus Service Manual
To Next Page
Loading...
Need help?
General
