Why does my Icom Transceiver automatically switch to reception while transmitting?
If your Icom Transceiver automatically switches to reception while transmitting, the Time-Out Timer function is likely activated. Turn OFF this function to prevent the automatic switch to reception during transmission.
General| Brand | Icom |
|---|---|
| Model | i2730A |
| Category | Transceiver |
| Language | English |
Warnings regarding high voltage, RF exposure, AC/DC power, wet hands, and metal objects.
Cautions about driving, audio levels, liquids, vehicle placement, and explosive atmospheres.
Guidelines for cleaning, temperature limits, sunlight exposure, air bags, and ignition spikes.
Details beep options and Bluetooth® pairing/connection.
Covers VOX function and headset audio output configurations.
Selecting output power and transmitting.
Storing frequencies into memory.
Organizing channels into banks.
Defining frequency ranges for scans.
Details on Full, Band, Program, Link, Duplex, Tone scans.
Marking channels to be skipped during scans.
Full, Band, Mode scans.
Scanning within banks.
Temporarily skipping frequencies during scans.
Setting priority watch with VFO frequencies.
Priority watch during scans.
How repeaters work and duplex function.
Shifting transmit frequency.
Setting OFF, DUP-, DUP+.
Automatic setting of repeater parameters.
Storing and using DTMF codes.
Sending stored DTMF codes.
Sending DTMF codes manually.
How tone squelch works.
Types of tone squelch (TSQL, DTCS) and reverse functions.
Selecting weather channels and alerts.
Data transfer via PC or cable.
Configuring the receiving unit.
Configuring the sending unit.
Powering the transceiver.
Safety and mounting instructions for the main unit.
Antenna placement and connection.
Connecting to a 12V power source.
Detailed battery connection steps.
Using Bluetooth® with headsets.
Installing the Bluetooth® module.
Common problems and solutions.
To Next Page
