D GPS TX mode
Sets transmitting position data from connected a GPS re-
ceiver ON and OFF.
When the position information is received from a connected
GPS receiver and the GPS Auto TX Timer setting (p. 95) is
set to a specifi c time, the transceiver automatically transmits
with the current position and message at every setting inter-
val.
(default: DISABLE)
• DISABLE : Transmitting position data is disable. (default)
• GPS : Transmitting position data at GPS mode.
• GPS-A : Transmitting position data at GPS-A mode.
• Sentence formatter setting
q Select “GPS” in GPS TX mode item, then push [ ](5)
†
to
enter the sentence formatter selection.
w Rotate [DIAL]
†
to select the desired sentence formatter.
•- RMC, GGA, GLL, GSA, VTG and GPS are selectable.
e Push [ ](5)
†
to enter the desired sentence formatter se-
lection.
r Rotate [DIAL]
†
to select the setting.
t Rotate [DIAL]
†
to select next sentence and repeat steps
w to r, or push [MENU/
] to return to frequency in-
dication.
•-Only three sentence formatters can be activated at same time.
To Next Page
Loading...
