1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Call sign edit record
Selects the call sign programming when the call sign is ed-
ited or corrected with the pre-programmed call sign.
• OFF : The edited or corrected call sign is over writ-
ten.
• SELECT : The edited or corrected call sign is pro-
grammed into the selected call sign memory.
• AUTO : The edited or corrected call sign is pro-
grammed into a blank channel automatically.
(default)
D Break-in function
The break-in function allows you to break into a conversa-
tion, where the two original stations are communicating with
call sign squelch enabled.
• OFF : The break-in function is set to OFF.
(default)
• ON : The break-in function is set to ON.
• “BK” appears on the display.
D EMR function
The EMR communication mode is available for digital mode
operation. In the EMR communication mode, no call sign
setting is necessary. When an EMR communication mode
signal is received, the audio (voice) will be heard at the
specified level even the volume setting level is set to mini-
mum level, or digital call sign/digital code squelch is in use.
• OFF : The EMR function is set to OFF.
(default)
• ON : The EMR function is set to ON.
• “EMR” appears on the display.
To Next Page
Loading...
