D Time stamp
Selects transmitting time stamp type from DHM, HMS and
OFF. This function can be transmitted UTC (Universal Time
Coordinated)time only.
• OFF : No time stamp is transmitted. (default)
• DHM : Time stamp in the format of Day, Hour and
Minute is transmitted.
• HMS : Time stamp in the format of Hour, Minute and
Second is transmitted.
D GPS-A symbol
Selects the desired GPS-A symbol.
Available symbols: Ambulance, Bus, Fire Truck, Bicycle,
Yacht, Helicopter, Small Aircraft, Ship (Power Boat), Car
(default), Motorcycle, Balloon, Jeep, Recreational Vehicle,
Truck, Van and Other.
If “Other” is selected, set the desired symbol code as follows;
q Push [
](5)
†
to enter programming condition.
w Rotate [DIAL] to select the 1st character from “\” and “/.”
e Push
Push [ ](6) to select the 2nd digit.
r Rotate [DIAL] to select the 2nd digit character.
t Push [
](5)
†
to program the symbol code, then exit pro-
gramming condition.
When “Other” is selected, check the symbol codes of
APRS
®
and set it correctly.
To Next Page
Loading...
