D DTMF TX KEY
Selects DTMF transmitting code when pushing and holding
[PTT], then pusing 10-key.
• KEY : [1]–[9], [0], [A], [B], [C], [D], [E] or [F] DTMF
code is transmitted respectively.
(default)
• DTMF-M : The assigned DTMF memory to [1]–[9] and
[0] is transmitted respectively.
■ Display set mode items
D Display backlighting
The transceiver has display backlighting with a 5 sec. timer
for night time operation. The display backlighting can be
turned ON continuously or turned OFF, if desired.
• OFF : The backlight is turned OFF.
• ON : The backlight continuously lights ON.
• AUTO : Lights when an operation is performed, goes out
after 5 sec. (default)
* C ontinuously lights ON while operating with an
external DC power source.
D Busy LED
The TX/RX indicator lights green while receiving a signal or
when the squelch is open. This indication can be turned OFF
to conserve the battery power, if desired.
• OFF : The indicator does not function even if a signal is
received.
• ON : The indicator lights green while receiving a signal
or when the squelch is open.
(default)
To Next Page
Loading...
