e Push [ ](6), then rotate[DIAL]
†
to select the desired
memory channel.
r Push [C](CALL) to switch alarm function ON or OFF.
t Push [
](4) to return to GPS MEMORY screen.
y Push [MENU/
] to return to frequency indication.
✔-For your information!
• When “RX” or memory channel is selected above step r,
alarm functions depending on “ALM AREA2” setting in the
GPS set mode (p. ??).
• When “ALL” or memory bank is selected above step r,
alarm functions depending on “ALM AREA1” setting in the
GPS set mode (p. ??).
■ Other functions for DV mode
operation
D DV voice memory
The IC-92A/92AD has a DV voice memory that records a
total 30 second
(approx.) of received audio.
The DV voice memory is divided into 2 tracks, 15 seconds
each in a track, as the default setting.
◆ Recording received audio
q Select DV mode in B band, and deactivate the priority
watch
(p. 83) and weather alert function (p. 114) if activated.
w While receiving a DV signal, push [REC].
e Rotate [DIAL] to select the desired track.
• “✱” is displayed beside the track number when the selected
track has been recorded.
r Push [REC] to start recording.
• Track counter (bar meter) is displayed during record.
To Next Page
Loading...
