■ GPS operation
Dipslaying (FM/AM/DV mode) or transmitting (DV mode
only) GPS data is available when connecting a 3rd party
GPS receiver*
(RS-232C output/NMEA format) and optional
HM-175GPS (GPS speaker microphone). GPS data pass
through the [DATA/SP/MIC] socket of the IC-92A/92AD.
In addition, the GPS message transmission is also available
for the GPS mode operation.
*GPS receiver with RS-232C terminal is required.
* Set “GPS TX MODE” to “GPS” or “GPS-A” at
r operation of right
colum when connecting a 3rd party GPS receiver.
D Sentence formatter setting
q Enter “GPS MODE” in DV set mode. (p. 94)
• GPS TX MODE screen is displayed.
w Rotate [DIAL]
†
to select “GPS.”
e Push [
](5)
†
to select GPS SENTENCE screen.
r Rotate [DIAL]
†
to select the desired GPS sentence, then
push [
](5).
• A total 6 sentences, RMC, GGA, GLL, GSA, VTG and GSV are
available.
t Rotate [DIAL]
†
to turn the sentence usage ON and OFF.
y Push [
](5) (or [ ](4)) to return to GPS SENTENCE
screen.
u Repeat the steps r to y to set another GPS sentence
usage.
• Up to 4 GPS sentences are usable at the same time.
i Push [MENU/ ] to return to frequency indication.
OPC-1799
(optional)
HM-175GPS
(optional)
to [DATA/SP/MIC]
to RS-232C port
(null modem
adapter is required)
GPS
receiver
❮MENU screen❯ ➪ ❮DV SET MODE❯ ➪ ❮GPS TX MODE❯
(Push [MENU/
]) (Rotate [DIAL]
†
, then push [ ](5)
†
.)
To Next Page
Loading...
