Icom IC-92A User Manual

■ DUP/TONE set mode items
D Offset frequency
Sets the offset frequency for duplex (repeater) operation
within a 0 to 159.995 MHz range.
The default value may differ according to the selected fre-
quency band (before accessing DUP/TONE set mode) and trans-
ceiver version.
The selected tuning step in VFO mode is used when set-
ting the offset frequency.
D Repeater tone frequency
Selects subaudible tone frequency for accessing a repeater,
etc. 50 tone frequencies
(67.0–254.1 Hz) are available.
(default: 88.5)
D TSQL frequency
Selects tone frequency for tone squelch or pocket beep op-
eration from one of 50 available frequencies
(67.0–254.1 Hz).
(default: 88.5)
• Available subaudible tone frequencies
The transceiver has 50 tone frequencies and conse-
quently their spacing is narrow compared with units
having 38 tones. Therefore, some tone frequencies may
receive interference from adjacent tone frequencies.
MENU SCREEN OPERATION
110
12
New2001
0.000.00
0.000.00
OFFSET FREQ
OFFSET FREQ
159.995.00
159.995.00
OFFSET FREQ
OFFSET FREQ
88.5
88.5
REPEATER TONE
REPEATER TONE
254.1
254.1
REPEATER TONE
REPEATER TONE
88.5
88.5
CTCSS TONE
CTCSS TONE
254.1
254.1
CTCSS TONE
CTCSS TONE
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
Ne
w

Icom IC-92A Specifications

General

Brand	Icom
Model	IC-92A
Category	Transceiver
Language	English