r Rotate [DIAL]
†
to select desired items (NAME, TIME,
LATITUDE, LONGITUDE, BANK or BANK NAME), then
push [
](6) to edit the selected item.
t Rotate [DIAL]
†
to select the desired character or symbol.
y Push [
](6) to select 2nd digit, then rotate [DIAL]
†
to se-
lect the desired character or code.
• Push [ ](6) to move the cursor right; push [ ](4) to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
u Repeat the steps r and t to enter the desired message.
• Up to 20-character messages can be set.
i Push [ ](5) to add the GPS data.
o Push [MENU/
] to return to frequency indication.
D GPS alarm setting
GPS alarm sounds when your own position is close the
specified area. This function can be set the received chan-
nel, specifi ed GPS memory channel, all GPS memory chan-
nels or a memory bank.
q Enter “GPS MEMORY” in message/position set mode.
• GPS MEMORY screen is displayed.
w Rotate [DIAL]
†
to select the desired memory bank or
memory channel.
• “RX”, “ALL”, one of the memory bank or memory channel can
be selected.
• Skip
e
and operate
r
when alarm RX, ALL, BANK A–Z set.
To Next Page
Loading...
